Standard Duty, Setscrew Locking, Ball Bearing Insert
Description
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Set screw shaft lock
Steel Cage
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses two set screws on the bearing inner race that are tightened to grip the shaft to achieve a secure hold and installs into a standard duty housings.
For drawings and 3D models, click on a part number.
Standard Duty, Eccentric Collar, Ball Bearing Insert
Description
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Eccentric collar shaft lock
Steel Cage
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses a collar with an off-center counter-bored recess groove. When mated with the bearing inner race and twisted, it locks to the shaft without screws and Installs into standard duty housings.
For drawings and 3D models, click on a part number.
Standard Duty, Concentric Locking, Ball Bearing Insert
Description
52100 Alloy Steel
Service: -10°F to 248 °F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Concentric shaft lock
Steel Cage
Outer-race anti-rotation Pin
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
This bearing has a concentric locking grip that uniformly distributes clamping pressure around the shaft for a secure hold. It provides better control for high speed and vibration than alternative mounting ball bearing configurations without marring the shaft. The outer race features an anti-rotation pin to minimize insert movement due to vibration and installs into a standard cast iron housing
For drawings and 3D models, click on a part number.
Standard Duty, Setscrew Locking, Cylindrical Ball Bearing Insert
Description
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Set screw shaft lock
Steel Cage
Cylindrical OD with snap ring
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses two set screws on the bearing inner race that are tightened to grip the shaft to achieve a secure hold and has a cylindrical OD for using with a cylindrically bored housing or frame. This insert is not self-aligning.
For drawings and 3D models, click on a part number.
Standard Duty, Setscrew Locking, Ball Bearing Insert
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Set screw shaft lock
Steel Cage
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses two set screws on the bearing inner race that are tightened to grip the shaft to achieve a secure hold and installs into a standard duty housings.
For drawings and 3D models, click on a part number.
Standard Duty, Eccentric Collar, Ball Bearing Insert
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Eccentric collar shaft lock
Steel Cage
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses a collar with an off-center counter-bored recess groove. When mated with the bearing inner race and twisted, it locks to the shaft without screws and Installs into standard duty housings.
For drawings and 3D models, click on a part number.
Standard Duty, Concentric Locking, Ball Bearing Insert
52100 Alloy Steel
Service: -10°F to 248 °F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Concentric shaft lock
Steel Cage
Outer-race anti-rotation Pin
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
This bearing has a concentric locking grip that uniformly distributes clamping pressure around the shaft for a secure hold. It provides better control for high speed and vibration than alternative mounting ball bearing configurations without marring the shaft. The outer race features an anti-rotation pin to minimize insert movement due to vibration and installs into a standard cast iron housing
For drawings and 3D models, click on a part number.
Standard Duty, Setscrew Locking, Cylindrical Ball Bearing Insert
52100 Alloy Steel
Service: -10°F to 248°F
B-type NBR seals and Galvanized steel shields
C3 internal clearance
Wide inner race
Set screw shaft lock
Steel Cage
Cylindrical OD with snap ring
Can be greased/PM'd
ISO 100, NLGI#2 synthetic PAO grease
Uses two set screws on the bearing inner race that are tightened to grip the shaft to achieve a secure hold and has a cylindrical OD for using with a cylindrically bored housing or frame. This insert is not self-aligning.
For drawings and 3D models, click on a part number.
checkbox icon Items deliver in 1-3 days with 2-day shipping. Unmarked items typically ship in 1-4 weeks. Any items listed as "Request For Quote" (RFQ) usually ship in 3-6 weeks.